Made from nitrocellulose mixed with thermoplastic acrylic resin and organic solvents.
Automobile refinishing paint, medical equipment, metal, plastic, rubber, bamboo, wood surface decoration.
塑膠漆
Made from nitrocellulose mixed with thermoplastic acrylic resin and organic solvents.
Automobile refinishing paint, medical equipment, metal, plastic, rubber, bamboo, wood surface decoration.
Nitro Acrylic Paint. Made of nitrocellulose mixed with thermoplastic acrylic resin and organic solvents.
It can be used for automobile refinishing, medical equipment, metal, plastic, rubber, bamboo products, wood surface decoration.
Can dry at room temperature, fast drying, strong weather resistance, 70-80 ℃ baking is better, easy to apply and smoothing, good chemical resistance.
 |  |  |  |
 |  |  |  |
| Amino Baking Paint | Two-Component Acrylic lacquer | Single Component Acrylic Lacquer | Nitro Acrylic Lacquer | |
| Decorative | ✅✅✅ | ✅✅✅ | ✅✅ | ✅ |
| Physical Properties | ✅✅✅ | ✅✅✅ | ✅✅✅ | ✅ |
| Drying conditions | Baking Required | Room temperature/baking (Mixed use period, relative air humidity should be less than 60% when drying at room temperature) | Room temperature/baking | Room temperature/baking (fast drying at room temperature) |
| Cost Performance | ✅✅✅ | ✅ | ✅ | ✅ |
| Weather Resistance | ✅✅✅ (Excellent adhesion on polished and plated surfaces) | ✅ | ✅ | ✅ |
| Adhesion Performance | ✅✅✅ | ✅ | ✅ | ✅ |
| Stone Chip Resistance | ✅✅✅ | ✅ | ✅ | ✅ |
It can be used for automobile refinishing, medical equipment, metal, plastic, rubber, bamboo and wood surface decoration.
 |  |  |
 |  |  |
| Coating Method | Manual Spraying |
| Spray Viscosity (No.2 cup) | 10-15S |
| Leveling Time | 8-10mins |
| Relative Humidity | 30％-70% |
| Construction Room Temperature | 5℃～40℃ |
| Baking Temperature/Time | 70-80℃℃/35-50mins (can also be dried at room temperature) |
Construction Parameters
| Construction Method | Nozzle Size | Outlet Pressure | Dilution Ratio (Mass Ratio) |
| Air Spray | ---- | 0.4-0.6MPa | 1:0.5-0.8 |
Technical Parameters
| Single Layer Per KG. | |
| Film Hardness | HB |
| Glossy 60 Degree Angle | 60-80 |
Remarks: Specialized electrostatic spray thinner is required for electrostatic spraying, and the viscosity of paint needs to be adjusted for roller coating and brush coating.
Surface Treatment:
The substrate needs to be pre-treated to ensure that it is dust and oil free.
Storage:
Store in a dry and cool environment, away from heat and ignition sources. The drum must be kept closed.
Storage Mode: 5℃～35℃
Storage time: less than 45 degrees Celsius, 6-12 months from date of manufacture (no lid)
Security Measures:
1. Avoid contact with skin and eyes.
2. When paint comes into contact with skin, wash with warm water or appropriate detergent. If paint comes into contact with eyes, flush with plenty of water and seek medical attention immediately.
3. Ensure good ventilation.
4. The paint contains combustible substances, please keep away from sparks and prohibit smoking in the immediate area.
5. All health and safety requirements will be observed on site.
Please Note:
Since the conditions of use of the products are beyond our control, the information herein is provided without warranty, i.e., we shall be liable to the buyer only in respect of the selection of the products. Due to the continuous development of our products and production processes, the contents of this manual are subject to change at any time, and all information herein is subject to our confirmation. Please make sure you have the latest version of this manual before using the product.
+86 15222021703
