Pure Acrylic Air-Drying Clear Varnish
Widely used in automotive refinishing, medical equipment, metal, plastic, rubber, wood surface decoration.
塑膠漆
Pure Acrylic Air-Drying Clear Varnish
Widely used in automotive refinishing, medical equipment, metal, plastic, rubber, wood surface decoration.
Pure Acrylic Air-Drying Clear Varnish, can be used for automotive refinishing, medical equipment, metal, plastic, rubber, wood surface decoration.
Low toxicity and environmental protection, anti-pollution, color stability, strong weather resistance, easy to clean and maintain the construction and other characteristics.
 |  |  |  |
 |  |  |  |
| Amino Baking Paint | Two-Component Acrylic Paint | Single Component Acrylic Paint | Nitro Acrylic Lacquer | |
| Decorative | ✅✅✅ | ✅✅✅ | ✅✅ | ✅ |
| Physical Properties | ✅✅✅ | ✅✅✅ | ✅✅✅ | ✅ |
| Drying Conditions | Baking required | Room temperature/baking (Mixed use period, relative air humidity should be less than 60% when drying at room temperature) | Room temperature/baking | Room temperature/baking (fast drying at room temperature) |
| Cost Performance | ✅✅✅ | ✅ | ✅ | ✅ |
| Weathering Resistance | ✅✅✅ (Excellent adhesion on polished and plated surfaces) | ✅ | ✅ | ✅ |
| Adhesion Performance | ✅✅✅ | ✅ | ✅ | ✅ |
| Stone Chip Resistance | ✅✅✅ | ✅ | ✅ | ✅ |
Can be used for automotive refinishing, medical equipment, metal, plastic, rubber and wood surface decoration.
It can be attached to ABS, PP, PC surfaces and complies with 3C standard.
 |  |  |
 |  |  |
| Coating Method | Electrostatic Spraying, Air Spraying |
| Spray Viscosity (No.2 cup) | 20-12s |
| Leveling Time | 8-10mins |
| Relative Humidity | 30％-70% |
| Construction Room Temperature | 5℃～40℃ |
| Baking Temperature/Time | 70-80℃/30-50mins (Can also be dried at room temperature) |
Construction Parameters
| Construction Method | Nozzle Size | Outlet Pressure | Dilution Ratio (Mass Ratio) |
| Air Spray | ---- | 0.4-0.6MPa | 1:0.5-0.8 |
| Thinner | Acrylic Thinner | ||
Technical Parameters
| Single Layer Per KG. | 10m2 |
| Film hardness | H-2H |
| Glossy 60 Degree Angle | Varnish>98 Color Paint>80 |
Remarks: Specialized electrostatic spray thinner is required for electrostatic spraying, and the viscosity of paint needs to be adjusted for roller coating and brush coating.
Surface Treatment:
The substrate needs to be pre-treated to ensure that it is dust and oil free.
Storage:
Store in a dry and cool environment, away from heat and ignition sources. The drum must be kept closed.
Storage Mode: 5℃～35℃
Storage time: less than 45 degrees Celsius, 6-12 months from date of manufacture (no lid)
Security Measures:
1. Avoid contact with skin and eyes.
2. When paint comes into contact with skin, wash with warm water or appropriate detergent. If paint comes into contact with eyes, flush with plenty of water and seek medical attention immediately.
3. Ensure good ventilation.
4. The paint contains combustible substances, please keep away from sparks and prohibit smoking in the immediate area.
5. All health and safety requirements will be observed on site.
Please Note:
Since the conditions of use of the products are beyond our control, the information herein is provided without warranty, i.e., we shall be liable to the buyer only in respect of the selection of the products. Due to the continuous development of our products and production processes, the contents of this manual are subject to change at any time, and all information herein is subject to our confirmation. Please make sure you have the latest version of this manual before using the product.
15602001474
