Product Features

Chlorinated Rubber Paint exhibits excellent weather resistance, effectively withstanding the impacts of harsh environmental factors such as wind, rain, and ultraviolet rays, ensuring a long service life.The coating is water-resistant and moisture-proof, making it suitable for metal surfaces used in humid environments.

With its strong resistance to acids, alkalis, and salt spray, it can be applied in environments exposed to acid, alkali, and salt corrosion, making it ideal for metal surfaces in chemical environments.With its strong resistance to acids, alkalis, and salt spray, it can be applied in environments exposed to acid, alkali, and salt corrosion, making it ideal for metal surfaces in chemical environments.

The product features excellent adhesion and comes in a single-component package, offering easy application. It can be applied using various methods, including brushing, rolling, and spraying.

Product Comparison

Scope of Application

Chlorinated Rubber Paint is widely used for anti-corrosion coating on various metal surfaces.

Including: steel structures, doors/windows, railings, stairs, architectural steel structures, etc.

Marine: ship hulls, decks, cabins, etc.

Petrochemical: storage tanks, pipelines, valves, etc.

Agricultural machinery: farm implements, tractors, etc.

Technical Parameters

Coating System

For use in harsh environments, such as high humidity and strong corrosion, it is recommended to select a coating system with excellent weather resistance, water resistance, acid and alkali resistance, and salt spray resistance.

For use in general environments, a coating system with good weather resistance, water resistance, acid and alkali resistance, and salt spray resistance can be chosen.

For Steel StructuresPrimer:Epoxy Zinc-Rich Primer or Inorganic Zinc-Rich PrimerTopcoat: Chlorinated Rubber Paint

For Aluminum AlloyPrimer: Zinc Phosphate Primer or Epoxy Primer for Light MetalsTopcoat: Chlorinated Rubber Paint

Construction Methods

    Construction temperature:5℃℃~40℃.

    Mixing: Use power tools or hand tools to mix well.

    Mixing ratio: single-component coating

    Application Methods:Airless spraying.Air spraying.Brush coating.Roller coating (specialized)

       Drying Time & Coating Interval

Surface Treatment：

    The surface of the steel to be coated must be thoroughly cleaned of oil, oxidized skin, rust, old coating, etc. Shot blasting or sand blasting method can be adopted to reach the Swedish rust removal standard Sa2.5 grade, with a roughness of 30-70 μm; or hand-operated rust removal method can also be adopted to reach the Swedish rust removal standard St3 grade, with a roughness of 30-70 μm.

Security measures:

    1、 Avoid contact with skin and eyes.

    2、When paint comes into contact with skin, wash with warm water or appropriate detergent. If paint comes into contact with eyes, flush with plenty of water and seek medical attention immediately.

    3、Ensure good ventilation.

    4、The paint contains combustible substances, please keep away from sparks and prohibit smoking in the immediate area.

    5、All health and safety requirements will be observed on site.

Storage：

     Store in a dry and cool environment, away from heat and ignition sources. The drum must be kept closed.

    Storage period: 12 months from date of manufacture (25°C)

Attention：

   Since the conditions of use of the products are beyond our control, the information contained herein is provided without warranty, i.e., the buyer is liable only for the selection of the products. Due to the continuous development of our products and production processes, the contents of this manual are subject to change at any time, and all information herein is subject to our confirmation. Please make sure that you have the latest version of this manual before using the product.