丙烯酸漆
Road Marking Paint is a specialized coating used to delineate traffic lines on roads or streets, guiding the direction of vehicles and pedestrians. It typically exhibits high wear resistance and weather resistance to ensure long-term visibility and durability. Road Marking Paint is available in various colors and specifications to meet the requirements of different traffic signage. Selecting the appropriate Road Marking Paint can enhance traffic safety and ensure road order.
A high-performance topcoat composed of modified acrylic.
Suitable for use on road surfaces and steel structures.
Excellent gloss and weather resistance
Superior resistance to seawater and oil
High wear resistance
Compatible with various coating systems
Fast drying
| Color | Various Colors |
| Gloss | Glossy |
| Solid Content% | 40 |
| Flash Point | Above 25°C |
| Film Thickness | Dry Film：30-50μm/coat；Wet Film：75-125μm/coat |
Theoretical Spreading Rate | 0.160 kg/m²/50 μm Depends on surface preparation, environmental conditions, application methods, and other factors. |
Construction Temperature: 5°C to 40°C
Mixing: Thoroughly mix using power tools or manual tools until uniform
Mixing Ratio: Single-Component Coating
Application Methods: Airless Spray, Air Spray, Brush Application, Roller Application (Specialized)
| Application Method | Nozzle Size | Outlet Pressure | Dilution ratio (by weight) |
| Airless Spraying | 0.43mm-0.53mm | 10-15Mpa | 20-27% |
| Air Spraying | ---- | ---- | 38-46% |
| Brushing/Rolling | ---- | ---- | 27-38% |
| Thinner | Acrylic thinner | ||
Drying Time & Recoating Interval：
| Temperature | 5℃ | 20℃ | 30℃ |
| Touch Dry | 1hrs | 30min | 20min |
Semi-Hard Dry | 6hrs | 3hrs | 2hrs |
| Minimum Recoat Interval | 12hrs | 6hrs | 4hrs |
Maximum Recoat Interval | |||
Suitable Substrates: Cement, Steel Structures, etc.
Surface Preparation
30~70μm。The steel surface to be coated must be thoroughly cleaned of oil, scale, rust, old coatings, etc. This can be achieved through shot blasting or sandblasting methods to meet the Swedish rust removal standard Sa2.5, with a roughness of 30–70 μm. Alternatively, manual rust removal methods can be used to meet the Swedish rust removal standard St3, with a roughness of 30–70 μm.
Safety Measures
1、Avoid contact with skin and eyes.
2、If paint comes into contact with skin, wash with warm water or an appropriate cleaning agent. If paint comes into contact with eyes, rinse thoroughly with water and seek medical attention immediately.
3、Ensure adequate ventilation.
4、The paint contains flammable substances. Keep away from sparks and prohibit smoking in the vicinity.
5、Comply with all health and safety regulations on-site.
Storage
Store in a dry and cool environment, away from heat sources and open flames. Keep the container tightly sealed.
Shelf life: 12 months from the date of production (at 25°C).
Please Notice
Since the conditions of product use are beyond our control, the information provided here does not constitute a warranty. We are only responsible for the selection of products. Due to the continuous development of our products and production processes, the content of this manual may be updated at any time. All information herein is subject to our confirmation. Before using the product, please ensure that you have the latest version of the manual.
15602001474
