Product Features

It can effectively withstand the impact of harsh environmental factors such as wind, rain, and UV rays, maintaining long-lasting brilliance and color retention, and offers an extended service life.

It is resistant to acids, alkalis, salt spray, and solvents, making it suitable for metal surfaces used in chemical environments.

The paint film is hard and wear-resistant, not easily scratched, and can withstand frequent friction and impact.

It offers a variety of color options with high gloss, delivering outstanding decorative effects. The coating is even and aesthetically pleasing, enhancing the texture and beauty of metal surfaces.

The coating has excellent flow properties, making it easy to apply. It can be applied using various methods such as brushing, rolling, or spraying.

Product Comparison

Application Scope

Acrylic Polyurethane Topcoat is widely used for anti-corrosion and decorative coating on various metal surfaces.

Including: steel structure bridges, buildings, doors and windows, power facilities, mechanical equipment, automobiles, trains, ships, machine tools, instruments and meters, control cabinets, hardware components, pipelines, containers, and more.

Technical Parameters

Coating System

To achieve the best coating performance and application results, it is recommended to use the following products in conjunction with Acrylic Polyurethane Topcoat:

Primers: Epoxy Primer, Zinc Phosphate Primer, Zinc-Rich Primer, etc.

Intermediate Coats: Epoxy Intermediate Coat, Polyurethane Intermediate Coat, etc.

Application Methods

    Application Temperature: -5°C to 40°C；

    Mixing: Stir thoroughly using power tools or manual tools to ensure even mixing；

    Mixing Ratio: Base/ Hardener = 10/1 (by weight)；

    Application Methods: Airless Spray, Air Spray, Brush, Roller (Dedicated)

Drying Time & Recoating Interval

Surface Preparation：

    The steel surface to be coated must be thoroughly cleaned of oil, scale, rust, and old coatings. This can be achieved through methods such as shot blasting or sandblasting, reaching the Swedish rust removal standard Sa2.5, with a roughness of 30–70 μm. Alternatively, manual rust removal methods can be used, reaching the Swedish rust removal standard St3, with a roughness of 30–70 μm.

Safety Measures：

    1、Avoid contact with skin and eyes.

    2、If paint comes into contact with skin, wash with warm water or an appropriate cleaning agent. If paint comes into contact with eyes, rinse thoroughly with water and seek medical attention immediately. 

    3、Ensure adequate ventilation.  

    4、The paint contains flammable substances. Keep away from sparks and prohibit smoking in the vicinity.  

    5、Comply with all health and safety regulations on-site.

Storage：

    Store in a dry and cool environment, away from heat sources and open flames. Keep the container tightly sealed.

    Shelf life: 12 months from the date of production (at 25°C).

Please Notice：

    Since the conditions of product use are beyond our control, the information provided here does not constitute a warranty. We are only responsible for the selection of products. Due to the continuous development of our products and production processes, the content of this manual may be updated at any time. All information herein is subject to our confirmation. Before using the product, please ensure that you have the latest version of the manual.