防銹漆
Composed of high chlorinated polyethylene resin, color pigments, additives, solvents, and other components.
Used for anti-corrosion and anti-rust coating of the inner and outer walls of pipelines, chemical equipment, marine equipment, sewage treatment facilities, bridges, and steel structures in industrial atmospheric environments. It is also applied to various concrete structures for anti-corrosion and weather-resistant coating.
Excellent resistance to acids, alkalis, salt spray, weathering, water, oil, and low temperatures.
Good sealing and barrier properties, effectively preventing contact between corrosive media and the substrate.
Strong adhesion and mechanical properties, with a dense coating that offers good impact resistance and wear resistance.
 |  |  |  |
 |  |  |  |
Widely used for anti-corrosion and anti-rust coating of the inner and outer walls of pipelines, chemical equipment, marine equipment, sewage treatment facilities, bridges, and steel structures in industrial atmospheric environments. It is also applied to various concrete structures for anti-corrosion and weather-resistant coating.
 |  |  |
 |  |  |
| Colour | All kinds of colors |
| Volume Solids% | 40-42 |
| Flash Point | Above 23℃ |
| Film Thickness | Dry Film: 25-40 µm/coat;Wet Film: 71-114 µm/coat |
Theoretical Spreading Rate | 0.175 kg/m²/50 µm The actual coating coverage rate is related to various factors such as surface treatment, external environment and construction methods. |
The high-chlorinated polyethylene topcoat can be used in combination with epoxy primer, epoxy zinc-rich primer and high-chlorinated polyethylene primer.
Application Temperature: 5°C to 40°C
Mixing: Stir thoroughly using power tools or manual tools to ensure even mixing.
Mixing ratio: Single-component coating
Application Methods: Airless spraying, air spraying, brushing, or rolling (specialized).
| Application Method | Nozzle Size | Outlet Pressure | Thinning Ratio |
| Airless Spraying | 0.43mm-0.53mm | 10-15Mpa | 10-15% |
| Air Spraying | ---- | ---- | 28-39% |
| Rushing/Rolling | ---- | ---- | 15-28% |
| Thinner | Special Thinner | ||
Drying Time & Recoating Interval
| Temperature | 5℃ | 20℃ | 30℃ |
| Touch Dry | 55mins | 25mins | 15mins |
Semi-Hard Dry | 5hrs | 2hrs | 1.5hrs |
| Minimum Recoat Interval | 1hrs | 40mins | 30mins |
Maximum Recoat Interval | Unlimited | ||
Suitable for undercoats: Epoxy Primer, High Chlorinated Polyethylene Primer, etc.
Surface Preparation
The steel surface to be coated must be thoroughly cleaned of oil, scale, rust, and old coatings. This can be achieved through shot blasting or sandblasting methods, reaching the Swedish rust removal standard Sa2.5, with a roughness of 30–70 μm. Alternatively, manual rust removal methods can be used, reaching the Swedish rust removal standard St3, with a roughness of 30–70 μm.
Safety Measures
1、Avoid contact with skin and eyes.
2、If paint comes into contact with skin, wash with warm water or an appropriate cleaning agent. If paint comes into contact with eyes, rinse thoroughly with water and seek medical attention immediately.
3、Ensure adequate ventilation.
4、The paint contains flammable substances. Keep away from sparks and prohibit smoking in the vicinity.
5、Comply with all health and safety regulations on-site.
Storage
Store in a dry and cool environment, away from heat sources and open flames. Keep the container tightly sealed.
Shelf life: 12 months from the date of production (at 25°C).
Please Notice:
Since the conditions of product use are beyond our control, the information provided here does not constitute a warranty. We are only responsible for the selection of products. Due to the continuous development of our products and production processes, the content of this manual may be updated at any time. All information herein is subject to our confirmation. Before using the product, please ensure that you have the latest version of the manual.
15602001474
