金屬漆
Amino-Alkyd Baking Paint, can also be referred to as amino baking varnish.
It can be used for surface decoration of bicycles, cars, tricycles, motorcycles, hardware products, mechanical equipment and other metal products.
The product has strong chemical corrosion resistance, good heat resistance, high surface hardness, wide choice of colors, high cost performance, high efficiency and environmental protection.
Translated with DeepL.com (free version)
Amino alkyd paint is a kind of baking paint made by mixing melamine resin resin and alkyd resin with organic solvent.
It can be used for surface decoration of bicycles, automobiles, tricycles, locomotives, hardware products, mechanical equipment and other metal products.
The products have strong chemical corrosion resistance, good heat resistance, high surface hardness, wide choice of colors, high cost performance ratio, high efficiency and environmental protection.
 |  |  |  |
|  |  |  |
| Amino Baking Paint | Two-Component Acrylic Paint | Single Component Acrylic Paint | Nitro Acrylic Lacquer | |
| Decorative | ✅✅✅ | ✅✅✅ | ✅✅ | ✅ |
Physical Properties | ✅✅✅ | ✅✅✅ | ✅✅✅ | ✅ |
| Drying Conditions | Baking required | Room temperature/baking (Mixed use period, relative air humidity should be less than 60% when drying at room temperature) | Room temperature/baking | Room temperature/baking (fast drying at room temperature) |
| Cost Performance | ✅✅✅ | ✅ | ✅ | ✅ |
| Weather Resistance | ✅✅✅ (Excellent adhesion on polished and plated surfaces) | ✅ | ✅ | ✅ |
| Adhesion Performance | ✅✅✅ | ✅ | ✅ | ✅ |
| Stone Chip Resistance | ✅✅✅ | ✅ | ✅ | ✅ |
It can be used for surface decoration of bicycles, automobiles, tricycles, locomotives, hardware products, mechanical equipment and other metal products.
It can be applied on the surface of iron, aluminum, magnesium, titanium and all kinds of light metal surfaces.
|  |  |
|  |  |
| Painting Method | Electrostatic Spraying, Manual Spraying |
| Spray Viscosity (No. 2 cup) | 15-20s |
| Leveling Time | 8-10mins |
| Relative Humidity | 30％-70% |
| Construction Room Temperature | 5℃～40℃ |
| Baking Temperature/Time | 130-140℃，20-15mins (can also be dried at room temperature) |
Construction Parameters
| Construction Method | Nozzle Size | Outlet Pressure | Dilution Ratio (Mass Ratio) |
| Air Spraying | ---- | 0.4-0.6MPa | 1:0.5-0.8 |
| Thinner | Specialized polyester baking lacquer thinner | ||
Technical Parameters
| Approx. single layer per KG sprayed | 10m2 |
| Film hardness | HB-H |
| Glossy 60 degree angle | Varnish>98Color paint>80 |
Note: Electrostatic spraying requires special electrostatic spraying thinner, rolling, brushing need to adjust the viscosity of the paint.
Surface Treatment:
The substrate needs to be pre-treated to ensure that it is dust and oil free.
Storage:
Store in a dry and cool environment, away from heat and ignition sources. The drum must be kept closed.
Storage Mode: 5℃～35℃
Storage time: less than 45 degrees Celsius, 6-12 months from date of manufacture (no lid)
Security Measures:
1. Avoid contact with skin and eyes.
2. When paint comes into contact with skin, wash with warm water or appropriate detergent. If paint comes into contact with eyes, flush with plenty of water and seek medical attention immediately.
3. Ensure good ventilation.
4. The paint contains combustible substances, please keep away from sparks and prohibit smoking in the immediate area.
5. All health and safety requirements will be observed on site.
Please Note:
Since the conditions of use of the products are beyond our control, the information herein is provided without warranty, i.e., we shall be liable to the buyer only in respect of the selection of the products. Due to the continuous development of our products and production processes, the contents of this manual are subject to change at any time, and all information herein is subject to our confirmation. Please make sure you have the latest version of this manual before using the product.
+86 15222021703
